Our Brands :

Shopping Cart

TRUCK SERIES

Showing 1–16 of 86 results

107MM MITSUBISHI OIL FILTER WRENCH (8POINT)

0 review(s)
Ask Quote

Ask Quote Add to cart

107MM MITSUBISHI OIL FILTER WRENCH (8POINT)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :OFW10708[/su_heading]
  •  To remove oil filter and drain fuel from the filter.
  •  Be sure to clean the o-ring surface before using the tool.
  •  Size : 1/2″DR x 8 Point
  •  Applicable : MITSUBISHI all new canter fourth phase eco-car   3.5 ton , 6.7 ton & 6.9 ton.

Ask Quote Add to cart

3/4″DR Truck Transmission Socket (Scania)

0 review(s)
Ask Quote

Ask Quote Add to cart

3/4″DR Truck Transmission Socket (Scania)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code : S346364TS[/su_heading]
  • This Special socket removes.
  • European truck repair tool.

Specifications:
– Inner ø : 63/64mm
– Outer ø : 70mm

Ask Quote Add to cart

BENZ & MAN CLAMP NUT SOCKET

0 review(s)
Ask Quote

Ask Quote Read More

BENZ & MAN CLAMP NUT SOCKET

0 review(s)
Ask Quote
  •  For professional loosening and tightening the clamp nut on the axle stub.
  •  Suitable for exact torque with a 3/4″ DR.
[su_table]

Item Code SPEC. HEIGHT APPLICATION
BM56CNS 72X56mm 53mm DAF, Kassbohrer / Setra, Benz & Man trucks (VL3,4,VD4,VL4) Benz buses (VO3,4) DAF, Kassbohrer / Setra, Benz & Man
BM60CNS 76X60mm 53mm Trucks 9tons (VL5, D-9) Benz Actros, Faust 9tons.

[/su_table]

Ask Quote Read More

BENZ & MAN DIFFERENTIAL REAR NUT SOCKET (113MM)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ & MAN DIFFERENTIAL REAR NUT SOCKET (113MM)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :BM113DNS[/su_heading]
  •  Special 6 teeth designed to remove the differential rear nut.
  •  Made from special steel for high tightening and loosening torque.
  •  Size : 3/4″DR x 113mm (6pt)
  •  Applicable : Man ,Mercedes Benz Truck.

Ask Quote Add to cart

BENZ & MAN DRIVE AXLE NUT SOCKET (101.5MM)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ & MAN DRIVE AXLE NUT SOCKET (101.5MM)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :BM1015ANS[/su_heading]
  •  Special designed with 6 teeth for removing the drive axle nut.
  •  Made from special steel for high tigtening and loosening torque.
  •  Size : 3/4″DR x 101.5mm (6Pt)
  •  Applicable : Man , Mercedes Benz truck.

Ask Quote Add to cart

BENZ & MAN REAR AXLE NUT SOCKET (101MM)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ & MAN REAR AXLE NUT SOCKET (101MM)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :BM34101ANS[/su_heading]
  •  Designed groove socket to remove the rear axle nut.
  •  Made from special steel for high tightening and loosening torque.
  •  Size : 3/4″DR x 101mm (6pt)
  •  Overall length : 110mm
  •  Applicable : Mercedes Benz And Man 10 + 13T Reducation axle, HYPOID   and TRAILER axle NR7/4.

Ask Quote Add to cart

BENZ & MAN REAR AXLE NUT SOCKET WITH TUBE (87MM)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ & MAN REAR AXLE NUT SOCKET WITH TUBE (87MM)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :BM3487ANS[/su_heading]
  •  Special rigid locating tube design for removing the rear axle nut easily.
  •  Made from special steel for high tightening and loosening torque.
  •  Size : 3/4″DR x 87mm (6pt)
  •  Overall length : 175mm
  •  Applicable : Mercedes Benz Atego rear axle.

Ask Quote Add to cart

BENZ AXLE NUT SOCKET (95MM)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ AXLE NUT SOCKET (95MM)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :B3695ANS[/su_heading]
  •  Made from special steel and robust execution to remove the axle nut.
  •  Any extensive slipping is avoided.
  •  Size : Drive SW36 x 95mm  (6pt)
  •  Overall length : 157mm.
  •  Applicable : Mercedes Benz axle trailers.

Ask Quote Add to cart

BENZ DIFFERENTIAL NUT SOCKET (72MM)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ DIFFERENTIAL NUT SOCKET (72MM)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :B72DNS[/su_heading]
  •  Use with 32mm wrench.
  •  Special designed for removing and installing the differential nuts.
  •  Made from special steel for high tightening and loosening  torque.
  •  Size : 72mm (6pt)
  •  Overall length : 60mm.
  •  Applicable : Mercedes Benz Citaro, Evo bus.

Ask Quote Add to cart

BENZ MAN CRANKSHAFT ALIGNMENT TOOL (3 GEARS)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ MAN CRANKSHAFT ALIGNMENT TOOL (3 GEARS)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :BM1203CA[/su_heading]
  •  Designed to adjust the engine for correct position.
  •  Use with 1/2″ drive wrench.
  •  Overall length : 90mm
  •  Applicable : Mercedes Benz Actors and atego,Man 5,6,8- cylinder engines – D25/28… etc.

Ask Quote Add to cart

BENZ MAN CRANSHAFT ALIGNMENT TOOL (2 GEARS)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ MAN CRANSHAFT ALIGNMENT TOOL (2 GEARS)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :BM1202CA[/su_heading]
  •  Designed to adjust the engine for correct position.
  •  Use with 1/2″ drive wrench.
  •  Overall length : 90mm
  •  Applicable : Mercedes Benz 6,8,10-cylinder engines, Man 12- cylinder engines … etc.

Ask Quote Add to cart

BENZ REAR AXLE NUT SOCKET (116MM)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ REAR AXLE NUT SOCKET (116MM)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :B116ANS[/su_heading]
  •  Special designed for dismanting and assembling the rear axle nut.
  •  Made from special steel for high tightening and loosening    torque.
  •  Size : 3/4″DR x 116mm (6pt)
  •  Overall length : 180mm.
  •  Applicable : Mercedes Benz Actros Rear axle, HL/HK8 (hypoid) etc.

Ask Quote Add to cart

BENZ REAR AXLE NUT SOCKET (123.5MM)

0 review(s)
Ask Quote

Ask Quote Add to cart

BENZ REAR AXLE NUT SOCKET (123.5MM)

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :B1235ANS[/su_heading]
  •  Use with 32mm wrench.
  •  Special designed for dismanting and assembling the rear axle nuts.
  •  Made from special steel for high tightening and loosening torque.
  •  Size : 123.5mm (6pt).
  •  Overall length :310mm.
  •  Applicable : Mercedes Benz Citaro.

Ask Quote Add to cart

CALIPER ADJUSTER SOCKET

0 review(s)
Ask Quote

Ask Quote Add to cart

CALIPER ADJUSTER SOCKET

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :T05CAS[/su_heading]
  •  Special 5 teeth designed to adjust the brake caliper.
  •  Overall length : 46mm.
  •  Use with 36mm wrench.
  •  Material : SCM440
  •  Applicable : most of European trucks, Scania, Volvo … etc.

Ask Quote Add to cart

GERMANY TYPE ADJUSTABLE REAR AXLE NUT TOOLS

0 review(s)
Ask Quote

Ask Quote Add to cart

GERMANY TYPE ADJUSTABLE REAR AXLE NUT TOOLS

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :LNT45150[/su_heading]
  •  Adjustable jaws with locking feature to suit both hexagon & octagon   wheel bearing lock nuts.
  •  Special tooth surface angle to clamp hexagon and octagon nut.
  • Top : 3/4″DR. , capacity : 45~150mm
  •  Length of jaw : 100mm.

Ask Quote Add to cart

MAN FLYWHEEL ROTATING TOOL

0 review(s)
Ask Quote

Ask Quote Add to cart

MAN FLYWHEEL ROTATING TOOL

0 review(s)
Ask Quote
[su_heading size="18" align="left" margin="10"]Code :M5266[/su_heading]
  • Designed for accurate rotating of the engine for valve setting of other   maintenance and service work.
  •  Use with 1/2″drive wrench.
  •  Overall length : 61mm
  •  Applicable : Man engine D20, D25, D26, D28…

Ask Quote Add to cart

VISIT OUR SHOP NOW!    

Address

SBC Tech Marketing Sdn. Bhd. (685289-P)
No.21, Jalan SBC 7, Taman Sri Batu Caves,
68100 Selangor Darul Ehsan, Malaysia.

Multi Ware Marketing Enterprise (002103277-U)
No.21, Jalan SBC 7, Taman Sri Batu Caves,
Batu Caves, 68100 Selangor Darul Ehsan.

Contact

TELEPHONE
+603 - 6184 1228
+603 - 6185 1228

FAX
+603 - 6184 2627

WEB

URL
www.sbtools.com.my
www.sab.com.my

Email
sbctm1228@gmail.com